Testimonials

Customers are saying

The Best Customer Service!!!

The H15R mini excavator was as I expected from watching plenty of YouTube. What I didn’t expect was the excellent customer service. My machine had an unexpected and serious issue. When I found this problem I immediately contacted AGT and they had a tech at my house in 4 days. I’m 5hrs from their Chicago warehouse and their tech drove here with all the right tools and all the right knowledge. I major repair was made in less than an hour.
I had a great sales experience, a great pickup experience and the best repair service. Highly recommend purchasing from AGT Equipment Corp.

Mark W -

Thick

Well built. Arrived fast. Was surprised

Richard W -

Brush cutter

Used it 15 minutes cutting grass then pump started shootings fluid out. The motor base was broken. I wrote a message to you with picture about motor replacement, so far no response. The made it good, sending a replacement motor.

John K -

AGT QNT50R

Was surprised by stability of the unit working on a hill

Chris i.V. -

Works great.

I use it for logs and split firewood. No issues

Mike -

Pleased

I have about 29 hours on the brush cutter so far. I had t shorten the blades approximately 1/4″ each. It does a very good job of mowing around ponds and road banks. Very pleased so far.

Anonymous -

Nice machine

I really like most of the features. I did add a cooling fan and replaced the floor mat. The Roto engine is a little hard to start, maybe a choke adjustment issue. Travelling down a slope can be dangerous since the track motors freewheel easily and speed can get out of control.

David -

Decent for price, but not without some issue.

Showed up and throttle control handle broken off, called customer service. No pickup, left voicemail, no reply after a couple days now, not the end of the world, $25 part, just annoying. Fuel shut off left on from factory, engine flooded. When I started it, shiot all the fuel out exhaust. Only ran for a few seconds which is good because there’s no oil in engine. No indication that oil was drained. I don’t suspect leak because there’s no oil all over machine. Couple scuffs in paint from shipping, not AGTs fault. Digger arm a little crooked (about 2° out of plumb). Hour meter not hooked up, probably from jostling during shipping. Thumb kit includes no direction, but reasonably self explanatory except for 3 way diverting valves. Assume they don’t get used, and the lack of adapters for connecting to H15, but there’s a note on ordering screen that states as such, fittings about $8 plus shipping online Also, thumb kit short (1) M25x100 bolt for affixing upper arm included in kit, so find another or get some spacers to make up slop. Rear engine cover panel one of the bolts was stripped out, so I’ll have to replace that. Track control arms bent at slightly different angles so they don’t line up, quite a bit of play in them so I plan on devising some method of stiffening them up, as well as the foot pedals.

All in all for a sub $6k machine it’s not bad, I’m sure more things will come up once I actually get to use it, as it is still in the shipping pallet, but I’m sure nothing anybody with a reasonable amount of mechanical inclination can’t overcome. FYI, the Majic brand Caterpillar Yellow from tractor supply near identical match to paint (if your machine is yellow).

Kevin Real -

Great machine

Very nice mini digger. Small but powerful and perfect for home use.

John Smith -

About 15″ Toothless Bucket for 1 Ton Mini Excavator | AGT-12EX-WD15B

It just right for the Agt works great

julie h. -

My toy

Haven’t had any problems rather than nuts and votes. Being loose did a few modifications works who are never overly heated

Charles mineo -

Great product fast shipping

as described

charlies49 -

Just got it

Just got it..no seat time yet

Michael -

Graet buy.

Not a single problem from order to delivery. Had a lift gate drop at the driveway. cut off the wrapping and drove it into the yard. engine oil was good but the hydraulic was only enough to operate. was going to change it anyways. checked all bolts and fittings did not find anything loose or leaking. Installed a hydraulic thumb without issue. would buy again.

mark j. -

About 2.8 Ton, Yanmar Diesel Engine Mini Excavator w/ Hydraulic Thumb | CFG-STE35SR

This machine is great and we have no complaints. We use this mostly for waterline and sewer/septic work. It is a very good quality machine for the price. We are actually looking to upgrade tomthe next size larger machine that AGT offers.

Nick Ruzicka -

Alchemy Ontario Canada

These are great machines! Lots of power and torque and higher quality than all Chinese Excavators. We have new and Used available for rent and or sale.

Alchemy Build -

I had to swap the dinL8 fittings on the aux valve body for dinL10 fittings ($5 each) but it works as advertised and I’m well pleased with it.

Where can we get replacements for those little blades under it?

Bobby I. -